More turntable work

After I glued the sub-deck to the bridge, I sanded the entire assy using 180 grit paper on top of glass. This got rid of the high spots and gave me a nice flat area to glue the deck to.

Made a new deck from Northeastern scribed siding (3/32 scr 1/32 thick) part no 332scr132P.
Used Walthers Goo to attach the deck to the bridge. Don't forget to drill 2 holes for the wires to the rail

Here are the new bridge support wheels

I re-attached the weights to the bridge

 

The photo below shows the TT and roundhouse. Still need to add rail and handrails to the TT

The coaling tower will be to the left.